Introduce:
The furnace is built up by steel, firebrick and other refractory materials. The maximum temperature of chamber is about 1000℃, so that to melt the aluminium or copper. Match with the regenerative burner, it can save 20% fuel and improve the efficiency. Also, the special tilting design of furnace gate is more suitable for the fork lift to input scrap.
| Production capacity | |
| Capacity: | 3t~35t |
| Fuel: | Heavy Oil, Diesel Oil, Natural Gas, LPG |
| Fuel Consumption (Base On More Than 90% Aluminium Ingot in the Scrap) | |
| Simple Burner | Consume 80kg Diesel Oil For One Ton Aluminium Ingot |
| Consume 85kg Heavy Oil For One Ton Aluminium Ingot | |
| Consume 37m3 LPG For One Ton Aluminium Ingot | |
| Consume 95m3 Natural Gas For One Ton Aluminium Ingot | |
| Regenerative Burner: | Consume 65kg Diesel Oil For One Ton Aluminium Ingot |
| Consume 70kg Heavy Oil For One Ton Aluminium Ingot | |
| Consume 30m3 LPG For One Ton Aluminium Ingot | |
| Consume 78m3 Natural Gas For One Ton Aluminium Ingot | |
| Speed Of Melting: | 3t/hr~4t/hr |
| Type | |
| Arch Roof Type | It's Cheaper Than Other Designs, And Suitable For Low Capacity Furnace With Vertical Gate |
| Flat Roof Type: | It's More Durable Than Arch Type For Furnace With All Kinds Of Capacities |
| Full Casting Type | It's Best For Heat Energy Preservation And Durability But Also The Most Expensive Compared With Other Designs |
Introduce:
The furnace is built up by steel, firebrick and other refractory materials. The maximum temperature of chamber is about 1000℃, so that to melt the aluminium or copper. Match with the regenerative burner, it can save 20% fuel and improve the efficiency. Also, the special tilting design of furnace gate is more suitable for the fork lift to input scrap.
| Production capacity | |
| Capacity: | 3t~35t |
| Fuel: | Heavy Oil, Diesel Oil, Natural Gas, LPG |
| Fuel Consumption (Base On More Than 90% Aluminium Ingot in the Scrap) | |
| Simple Burner | Consume 80kg Diesel Oil For One Ton Aluminium Ingot |
| Consume 85kg Heavy Oil For One Ton Aluminium Ingot | |
| Consume 37m3 LPG For One Ton Aluminium Ingot | |
| Consume 95m3 Natural Gas For One Ton Aluminium Ingot | |
| Regenerative Burner: | Consume 65kg Diesel Oil For One Ton Aluminium Ingot |
| Consume 70kg Heavy Oil For One Ton Aluminium Ingot | |
| Consume 30m3 LPG For One Ton Aluminium Ingot | |
| Consume 78m3 Natural Gas For One Ton Aluminium Ingot | |
| Speed Of Melting: | 3t/hr~4t/hr |
| Type | |
| Arch Roof Type | It's Cheaper Than Other Designs, And Suitable For Low Capacity Furnace With Vertical Gate |
| Flat Roof Type: | It's More Durable Than Arch Type For Furnace With All Kinds Of Capacities |
| Full Casting Type | It's Best For Heat Energy Preservation And Durability But Also The Most Expensive Compared With Other Designs |
pbinfo.cn
